Rust-Oleum 252462 Automotive Enamel Spray, 12 Oz, Gloss Black

Rust-Oleum Auto Enamel Spray provides a long-lasting color finish with superior gloss retention. It’s durable long lasting finish resists nicks and scratches. Rust-Oleum Automotive Enamel provides a long-lasting protective barrier that seals out moisture and prevents rust and corrosion. Its durable formula can be applied over bare and primed metal surfaces for a smooth gloss finish. Ideal for use on autos, trailers, RVs and auto accessories.

Highlights:

• Size: 12 Oz.
• Color: Gloss Black
• For Indoor/Outdoor use.
• Gloss finish.
• UV- and weather-resistant.
• Ideal for exterior metal.
• Wide fan spray for a smooth finish with superior color retention.
• Durable, long-lasting finish resists nicks and scratches.

Painting Conditions:

Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50°F (10°C) and 90°F (32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces, when heated, exceed 200°F (93°C). Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Application:

Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle Do not strike can. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart. Apply multiple coats versus applying one heavy coat. Do not use near open flame.

Dry & Recoat:

Dry and recoat times are based on 70°F and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 15 minutes and to handle in 1-2 hours. Surface can be recoated within 2 hours or after 48 hours. If recoating after 48 hours, repeat the surface preparation steps. Light wet sanding with 600 grit sandpaper is recommended. The freshly coated surface can be buffed with wax or polish after one week.

Clean-Up:

When finished spraying, clear spray valve by turning can upside down and depressing spray button for 3-5 seconds (some paint will be sprayed out, so be careful to not inadvertently spray yourself or other objects). Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor.

Clogging:

If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening.

Physical Properties:

• Resin Type: Modified Alkyd
• Pigment Type: Varies with color
• Fill Weight: 1.40 Max
• Solvents: 11 ounces
• MIR: Acetone and Aromatic Hydrocarbons
• Recommended Dry Film Thickness (DFT) Per Coat: 1.0-2.0 mil (25-50μ)
• Practical Coverage at Recommended DFT: 8-10 sq.ft./can (0.90-1.1 m²/can)
• Dry Times at 77°F (25°C) and 50% Relative Humidity: Touch (15 minutes), Handle (1-2 hours), Fully Dry (24 hours)
• Shelf Life: 5 years
• Flash Point: -156°F (-104°C)