Adafruit Motor/Stepper/Servo Shield For Arduino V2.3 Kit

We Have Upgraded The Shield Kit To Make The Bestest, Easiest Way To Drive Dc And Stepper Motors. This Shield Will Make Quick Work Of Your Next Robotics Project! We Kept The Ability To Drive Up To 4 Dc Motors Or 2 Stepper Motors, But Added Many Improvements: Lots Of Other Little Improvements Such As A Polarity Protection Fet On The Power Pins And A Bit Of Prototyping Area. And The Shield Is Assembled And Tested Here At Adafruit So All You Have To Do Is Solder On Straight Or Stacking Headers And The Terminal Blocks. Lets Check Out These Specs Again: 2 Connections For 5V 'Hobby' Servos Connected To The Arduino'S High-Resolution Dedicated Timer - No Jitter! 4 H-Bridges: Tb6612 Chipset Provides 1.2A Per Bridge (3A Peak) With Thermal Shutdown Protection, Internal Kickback Protection Diodes. Can Run Motors On 4.5Vdc To 13.5Vdc. Up To 4 Bi-Directional Dc Motors With Individual 8-Bit Speed Selection (So, About 0.5% Resolution) Up To 2 Stepper Motors (Unipolar Or Bipolar) With Single Coil, Double Coil, Interleaved Or Micro-Stepping. Motors Automatically Disabled On Power-Up Big Terminal Block Connectors To Easily Hook Up Wires (18-26Awg) And Power Arduino Reset Button Brought Up Top Polarity Protected 2-Pin Terminal Block And Jumper To Connect External Power, For Separate Logic/Motor Supplies Tested Compatible With Arduino Uno, Leonardo, Adk/Mega R3, Due, Diecimila & Duemilanove. Works With Mega/Adk R2 And Earlier With 2 Wire Jumpers. Download The Easy-To-Use Arduino Software Library, Check Out The Examples And You'Re Ready To Go! New! As Of 3/21/2014 We Are Shipping Motor Shields With The Terminal Blocks, And Power Jumper Pre-Soldered On. You'Ll Still Need To Do A Little Soldering To Put On The Shield-Headers (Or Stacking Headers) But It Should Be Even Easier And Faster To Get Started!